YAESU FT-250R

ULTRA COMPACT 5-WATT 144 MHz HANDHELD

Price IDR 1,500,000

Maaf, stock habis



ULTRA COMPACT 5-WATT 144 MHz HANDHELD


Compact yet incredibly rugged, the FT-250R 2-meter handheld is derived from our Vertex commercial transceiver line, providing exceptional receiver performance along with clean, clear transmit audio. Built to withstand the rigors of outdoor use, the 16-key FT-250R is constructed inside a die-cast aluminum housing, with a large, high-output speaker delivering 700 mW of Loud Audio for outside field environments. And the illuminated keypad provides easy viewing during nighttime operation. You need a radio that's as tough as your operating environment; compare the features of the FT-250R to other handhelds, and you’ll see that there is no comparison!



5 Watts Power Output
The FT-250R puts out a maximum of 5 Watts of clean power, with selectable power-saving choices of 2 Watts and ½ Watt also being available with the touch of a front panel key.
Long-life Battery and Desktop Charger
The FT-250R comes complete with a 1400 mAh battery and a desirable desktop charger
Loud Audio
The FT-250R provides 700mW of Loud Audio and is the perfect choice for noisy environments.
Power Saving Circuit Design
The FT-250R includes Yaesu's exclusive power saving circuit design that provides for longer operating time that most other handhelds with comparable batteries.
Direct Keypad Frequency Entry
The FT-250R includes a 16-key keypad, providing both direct frequency entry and fingertip DTMF control on transmission. And a 9-memory DTMF autodialer allows simple access to autopatches or Internet Linking nodes such as the Yaesu WIRES-II system.
209 Memories
The versatile memory system of the FT-250R includes a total of 209 channels that can store frequency, CTCSS/DCS information, repeater shift, and a 7-character alpha-numeric label to aid in channel recognition.
Wide/Narrow Deviation Selection
For operation in narrow-band channel situation, the FT-250R includes both Wide and Narrow deviation selection capability, to ensure compatibility with local operating requirements.
Ultra-Rugged Construction
The FT-250R is tested to meet the exacting requirements of MIL STD 810C/D for shock and vibration. Among the most rugged Amateur hand-helds ever created, the FT-250R is ready for action in the most challenging operating environments!
Other Features
- Water resistant case construction
- Automatic Repeater Shift
- Memory-Only operating
- Scanning Mode: VFO / Memory / PMS / Dual Watch
- Nine DTMF Auto-dialer memories
- Two Front Panel programmable keys
- RF Squelch
- Battery Voltage Display
- TX Deviation Level (5 kHz or 2.5 kHz)
- Transmit Time-out Timer and Automatic Power-Off
- Busy Channel Lock-out
- ARTS (Auto-range Transponding System) that "beeps" the user when you move out of communications range
GENERAL
Frequency Range Receive:
136 - 174 MHz
Frequency Range Transmit:
144 - 148 MHz
Channel Steps:
5/10/12.5/15/20/25 & 50 kHz
Standard Repeater Shift:
±600 kHz
Emission Type:
F2D, F3E
Supply Voltage:
6.0~16 VDC
Current Consumption:
130 mA (Receive)
0
8 mA (Auto Power Off)
0
1300mA (5W)
Case Size:
2.3" W x 4.3" H x 1" D (58x109x27mm)
Weight:
12.4 oz. 352 g. (Approx., w/ant. & battery)
0
RECEIVER
Circuit Type:
Double-conversion superheterodyne
Sensitivity (12dB SINAD):
Better than 0.16uV
Adjacent Channel Selectivity:
Better than 70 dB
Intermodulation:
Better than 70 dB
AF Output:
0.4W @ 8 Ohms for 5% THD (@ 7.2 V)
0
TRANSMITTER
RF Power Output:
5/2/0.5W (@ 7.2 V DC)
Frequency Stability:
Better than ±5 ppm
Modulation Type:
Variable Reactance
Maximum Deviation:
±5 kHz
Spurious Emission:
Better than 60 dB below carrier
Audio Distortion:
Less than 5% (@1 kHz, w/3 kHz deviation)
Microphone Impedance:
2 k Ohm Condenser
0
Specifications are subject to change without notice, and are guaranteed within amateur bands only.