Stable 65W* Output and New Digital Features, Frequency Range : 136 - 174 MHz

Price IDR 4,600,000
Quantity :

Read the QST Review of the IC-2200H here!
*Click the image to view the PDF review.


65W* of output power

A MOS-FET power amplifier provides 65W* of stable output power. A one piece, aluminum chassis helps to keep the transceiver cool and provides durable long-lasting construction.
* Depending on version

Optional digital unit, UT-118

The optional UT-118 provides digitally modulated and demodulated clear voice and data communication at 4.8kbps. Store up to 6 of your own callsigns, and up to 6 more from other stations. Or instead of recording a callsign, record any message of up to 20 characters. You may then make a call by sending one of your callsigns or a recorded CQ message. The digital callsign squelch allows you to choose an incoming call selected by the callsign. When connected to an external GPS receiver*, position information may be exchanged with other stations.
* NMEA 0183 output and RS-232C interface are required.

Simple operation

The IC-2200H retains a familiar user interface to the IC-2100H. The large tuning dial provides easy access to active channels even without looking at the front panel. Secondary functions are easily recalled by holding the appropriate button.

Dynamic Memory Scan (DMS)

With a total of 207 alphanumeric memory channels, Icom’s exclusive DMS system allows you to scan selected memory banks by simply adding and deleting bank links.

CTCSS and DTCS operation standard

The IC-2200H contains 50 CTCSS and 104×2 DTCS encode/decode plus tone scan functions. The “pocket beep” feature gives you an audible and visual indicator of an incoming call.

And more…

  • 24 DTMFautodial memories
  • DTMFcode squelch and pager function with optional DTMF decoder, UT-108
  • Weather channel with weather alert function
    U.S.A. version only
  • FM narrow mode switchable
    Depending on version
  • Selectable squelch delay
  • Built-in 10dB squelch attenuator
Frequency range (Unit: MHz)
VersionTransmit rangeReceiver range
U.S.A. 144–148 118–174*1
 Europe 144–146 118–174*2
 Europe-1 144–146 144–146
 Taiwan 144–146 144–146
 Korea 144–146 144–146
 Export 136–174 118–174
*1 Guaranteed range 144-148MHz
*2 Guaranteed range 144-146MHz
Mode FM, AM(Rx only)
No. of memory channels 207 (incl., 6 scan edges,  1 call channel)
Operating Temp. range

–10°C to +60°C

+14°F to +140°F

Frequency stability ±10 ppm –10°C to +60°C
Power supply requirement 13.8 V DC ±15% (negative ground)
Current drain
 Tx at 65W 15 A
 Rx Max Audio 1.0 A
  Standby 0.8 A
Antenna connector SO-239 (50Ω)
(projections not included)
140(W) × 40(H) × 146(D) mm;
5 1/2(W) × 1 9/16(H) × 7 3/4(D) in
Weight 1.25 kg; 2.75 lb
Output power
Korea version
Taiwan version

65, 25*, 10*, 5*W selectable
50, 25*, 10*, 5*W selectable
24, 10*, 5*W selectable

Maximum frequency ±5.0 / ±2.5 kHz deviation (wide/narrow)
Spurious emission –70 dBc typical.
Microphone connector 8-pin modular (600Ω)
Receive system Double-conversion super heterodyne system
Intermediate frequencies
21.7 MHz
450 kHz
Receive Sensitivity 0.133µV typical (at 12dB SINAD)
Squelch sensitivity 0.100µV typical (threshold)

More than 6 kHz at -6dB
Less than 14 kHz at -60dB
More than 3 kHz at -6dB
Less than 9 kHz at -55 dB

Spurious and image rejection More than 60dB
Audio output power
(at 13.8 V DC)
More than 2.4W at 10% distortion at 8Ω
Ext SP connector 3-connector 3.5 (d) mm (1/8″)

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the
following MIL-STD requirements and strict environmental standards.

Standard MIL 810 C MIL 810 D MIL 810 E MIL 810 F
Method Proc Method Proc Method Proc Method Proc
Low Pressure 500.1 I 500.2 I, II 500.3 I, II 500.4 I, II
High Temp. 501.1 I 501.2 I, II 501.3 I, II 501.4 I, II
Low Temp. 502.1 I 502.2 I, II 502.3 I, II 502.4 I, II
Temp. Shock 503.1 I 503.2 I 503.3 I 503.4 I
Solar Radiation 505.1 I 505.2 I 505.3 I 505.4 I
Humidity 507.1 I, II 507.2 II, III 507.3 II, III 507.4
Salt Fog 509.1 I 509.2 I 509.3 I 509.4
Dust Blowing 510.1 I 510.2 I 510.3 I 510.4 I
Vibration 514.2 VIII, X 514.3 I 514.4 I 514.5 I
Shock 516.2 I, II, V 516.3 I, IV 516.4 I, IV 516.5 I, IV

All stated specifications are subject to change without notice or obligation.

Supplied Accessories

  • Remote control microphone, HM-133V*
  • Microphone hanger*
  • DC power cable, OPC-1132
  • Spare fuse
  • Mobile mounting bracket kit