Advanced DSP marine radio with compact remote head
Digital Signal Processor
The digital IF filter provides flexible filter settings for narrow bandwidth signals without having to install an optional filter.
Large LCD with dot-matrix characters
The IC-M802 has the capability of up to 24 characters × 9 lines full dot-matrix display. Operating status and setting of information can be seen instantly and clearly.
Built-in 2-tone Alarm function
A 2-tone alarm (2182kHz) signal can be transmitted simply by the push of the 'Alarm' button. A spring loaded cover prevents accidental activation.
Automatic antenna tuner, AT-140
The optional AT-140 easily connects to the radio without opening the casing. The tuner through function can be used with the AT-140.
- 4×8-inch remote controller and 4×4-inch external speaker
- Channel and Group dials offer easy channel selection and operation
- Powerful 150W (PEP) output
- 0.5 to 29.9999MHz wideband receiver
- DIN and RS-232C connectors for external equipment
- NMEA 0183 interface included
IC-M802 General version
|Power supply requirement
||13.6V DC ±15% (negative ground)
(Projections not included)
|Current drain (approx.)||Transmit (High)
||30A typ. at max. power
|Max. audio output
|Sensitivity||J3E, A1A, J2B, F1B
(at 10dB S/N; 1.8–29.999MHz)
(at 10dB S/N; 1.8–3.999MHz)
|Selectivity||J3E, R3E, J2B, A1A
|Audio output power (10% dist/ 4Ω load)
|RF output power (PEP)
(output power differs depending on version)